Datasat XD20, Инструкция по установке и эксплуатации, Страница: 111 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 97
Save on USB
Select Save on USB from the Master Settings menu and the following message appears.
Enter Start the Save process.
◄ Cancel.
Insert the USB memory device into the XD20 and press Enter to start the Save process . If there is no
USB memory device, a message appears, asking you to insert one.
The following message appears if the operation finishes without errors.
Enter Return to previous menu.
If an error occurs, the following message appears.
Load from USB
Select Load from USB from the Master Settings menu and the following message appears.
Enter Start the Load process.
◄ Cancel.
Insert the USB memory device that contains the Master settings into the XD20 and press Enter to start
the process . If there is no USB memory device, a message appears, asking you to insert one.
After the Master settings are loaded onto the hard drive, the following message appears.
Enter Continue.
When you press Enter , the following message appears on the screen. Restart the XD20 before continuing
to use it. (Turn XD20 off and then on again, to restart.)