Datasat XD20, Инструкция по установке и эксплуатации

Страница: 54 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 40
3.2.4. External Input Mode
This menu allows XD20 to route audio from the external digital or S/PDIF input to the cinema processor
and select routing options for PCM audio. The selection will not be saved when XD20 restarts.
Main Menu
→
Playback
→
External Input
Disable Disables the S/PDIF or 8-Ch Digital In mode for normal operation.
8-Ch Digital In Route 8 channel audio from Digital Audio In connector.
DTS Decodes DTS CA bit-stream from the S/PDIF input to 5.1 channels. (Will
result in no audio if any other type of input is provided.)
PCM: L/R Accepts 2-channel PCM audio from the S/PDIF input and routes it to the
front left and front right channels.
PCM: LS/RS Accepts 2-channel PCM audio from the S/PDIF input and routes it to the
left surround and right surround channels.
PCM:L+LS/R+RS Accepts 2-channel PCM audio from the S/PDIF input and routes the left
channel input to the left front and left surround channels, and the right
channel input to the right front and right surround channels.
PCM: NEO:6 Accepts 2-channel PCM audio from the S/PDIF input and uses NEO:6
decoding to route it to all 6 channel outputs.
Exit Menus Return to the status display.
When the mode you selected is enabled, the Audio indicator will illuminate and XD20 status display will
indicate that the XD20 is processing audio from the external input.
The blue front panel LED goes on when selecting an external input.
Note: If the XD20 does not receive a valid digital audio signal on the selected input, then there
will be short blinks (25% off) on the blue audio LED until the signal appears.