Datasat XD20, Инструкция по установке и эксплуатации

Страница: 36 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 22
2.8.1. Video Projector Settings
The following table lists the video projector settings that are saved by the menu command and restored
for each playlist. Some settings are forced to a certain value on the projector.
Table 8: Video Projector Settings
Option Value Comment
BRIGHT Brightness 000-063 Save/Restore Settings
CONT Contrast 000-063 Save/Restore Settings
COLOR Color 000-063 Save/Restore Settings
TINT Tint 000-063 Save/Restore Settings
SHARP Sharpness 000-015 Save/Restore Settings
GAMMA Gamma 000-015 Save/Restore Settings
WBAL-R White balance, red 000-063 Save/Restore Settings
WBAL-G White balance, green 000-063 Save/Restore Settings
WBAL-B White balance, blue 000-063 Save/Restore Settings
COLORTEMP Color temp 000-003 Save/Restore Settings
FANSPEED Fan Control Speed Save/Restore Settings
KEYSTONE Keystone setting Save/Restore Settings
CEIL When ON, image is top/bottom inverted Save/Restore Settings
REAR When Rear is ON, image is left/right reversed Save/Restore Settings
NZRED noise reduction ON/OFF Force OFF
PROGV progressive scan ON/OFF Force ON
IMAGE image mode (STAND, REAL, CINEMA, IMAGE1,
IMAGE2, IMAGE3, IMAGE4) Force STAND
INPUT Select input 1-3 Save/restore
SOURCE Select Input source DIGITAL, ANALOG, VIDEO,
SVIDEO, YC, YPBPR, YCBPR, YCBCR, HD-SDI,
SD-SDI Force Digital
SYSTEM SYSTEM OF CURRENT INPUT AUTO, NTSC,
NTSC443, PAL, PAL, SECAM, PAL=M, PAL-N,
1080I60, 1080I60, 1035I, 720P, 575P, 480P, 575I,
480I Force AUTO
SCREEN NORMAL (4:3), FULL (16:9) Force Full
TRUE ON - Select TRUE, OFF - Cancels TRUE Force ON
DISP Set/Cancel Display Force Off - Only on
Projector 1
BBACK Turn on/off Blue background Force Off - Only on
Projector 1
LOGO Turn on/off Logo Display Force Off - Only on
Projector 1
LAMPMODE Full or Half Force Full, only works on
WF-10.