Datasat XD20, Инструкция по установке и эксплуатации

Страница: 49 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 35
3.2.3.3.4. CSS Lamp Hours
The CSS Lamp Hours feature works only for the original DTS-CSP InFocus projectors. If other
projectors are used, an “Unavailable” message will display.
This menu displays the number of hours the cinema subtitling projector lamp has been used. This makes it
easy to replace the lamp before it fails. For example, if a lamp has been used for 20 hours, the following
message will appear on the screen.
CSS Playback
→
CSS Lamp Hours
Note: The DTS-CSP projector lamp must be replaced after 1,400 hours of use. If another
projector is used, consult the manufacturer for lamp maintenance/replacement.
If the cinema subtitling projector lamp is damaged, has failed, or has been removed from the projector,
the following message will appear on the screen.
Other reasons for receiving this message are:
•
Power to the projector is not on.
•
There are communication (cable) problems.
•
The system is not connected to an InFocus projector.
3.2.3.4. Contents Menu
The film soundtrack and CSS content may be viewed and deleted through the Contents menus.
To access the contents menu, select
Contents from the Film menu, and press Enter . The Contents menu,
shown below, will display.
Playback
→
Film
→
Contents
Features Lists any feature films titles that have soundtrack or CSS content on the
XD20.
Trailers List any trailers that have soundtrack or CSS content on XD20.
Delete Contents Delete selected contents from the XD20 hard drive. This includes the
following contents available through DTS Access™: subtitling, captions,
and narrations.
Exit Menus Return to the status display.
3.2.3.4.1. Display Feature Contents
From the Contents menu, select Features. XD20 displays a list of features for which soundtrack,
narration, CSS, or Rear Window content is loaded on XD20.