Datasat XD20, Инструкция по установке и эксплуатации

Страница: 66 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 52
5.1. Unpacking System Components
The following is a list of the standard components for an XD20 shipment. The exact contents will vary,
depending on the options you have ordered.
•
XD20 chassis and power cord
•
D600 Timecode Reader Head
•
Reader Head mounting bracket and screws
•
D600 Timecode Reader Head interconnect cable
•
Audio and automation cables (the exact model of cables and other interface components will
vary, depending on the cinema processor the XD20 unit is connected to. See Appendix D,
Cable
Assemblies and Breakout Boards and Appendix E , TC Reader Head Mounting Brackets , for
details.)
•
Digital Output Cable
•
Installation Hardware (screws, brackets)
•
XD20 Installation and Operation Guide
•
DTS trailer (logo) films, 2 scope and 2 flat
Note : Refer to the actual packing slip from your order to verify the contents of your shipment.
Contact Datasat Digital Entertainment immediately if items listed on your packing slip are
missing.
5.1.1. Preliminary Inspection
Note : Before installing the XD20 unit, take a complete inventory of system components to
minimize problems or questions during installation. Additionally, save all packing materials
until installation is complete in case you need to return parts to the factory.
5.2. Installation Procedures
The XD20 chassis is the main component of the XD20 system. Installation procedures include:
•
Mounting the XD20 chassis in a rack
•
Connecting the XD20 unit to a cinema processor
•
Connecting the XD20 unit to a power supply
•
Installing the D600 Timecode Reader Head (for soundtrack or DTS Access™ content:
subtitling, captions and narration.
Note : If you have a license for the CSS Option, follow the procedures in Appendix J,
Installing CSS , after following the procedures in this chapter.
5.2.1. Chassis Rack Mounting and Connection
The XD20 unit is designed to integrate into your existing theater sound system without affecting normal
theater operation. All interconnects are standalone and most systems require no cuts or jumpers.
The XD20 chassis requires 2U of standard rack space for proper mounting. Select a space in the sound
rack within three feet of the cinema processor to which you are connecting.
1. Bolt the XD20 into the selected rack space.
Caution : Because the XD20, like any other computer-based system, can be damaged by
power line surges, we recommend using a computer-grade surge/spike suppresser.
2. Connect the analog and logic cables/cards to your cinema sound processor. (See Appendix B for
cinema processor interface wiring diagrams and Appendix D for cable assembly diagrams,
including installation into sound racks with digital sound systems from Dolby and/or Sony.)