Datasat XD20, Инструкция по установке и эксплуатации, Страница: 122 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 108
7.10. System Clock
The System Clock menus allow you to set and view the date, time and Time Zone for your XD20. These
settings are needed for logging information and for playing video playlists with auto-start times.
Setting the Time Zone also allows the XD20 to automatically accommodate Daylight Savings Time.
Note : If you are using a NTP server, the date and time are set on a regular basis. But the Time
Zone must be properly set.
Main Menu
→
Setup
→
System
→
System Clock
Set Time Zone
Set System Date
Set System Time
Exit Menus Return to Status display.
7.10.1. Set Time Zone
The Time Zone menu shows the current Time Zone set for the XD20. The following message displays
when the Time Zone menu is selected:
System
→
System Clock
→
Set Time Zone
◄ Return to System Clock menu.
Enter Change Time Zone, go to Select Location menu.
To change the Time Zone, it is necessary to enter a location, a country, and then finally a Time Zone. The
following menu displays after pressing
Enter to change the Time Zone.
▲ or ▼ Cycle through list of locations (regions): Americas, Africa, Pacific Ocean,
Indian Ocean, Europe, Australia, Atlantic Ocean, Asia, Arctic Ocean,
Antarctica.
◄ Return to the Current Time Zone menu.
Enter Select location (region) listed.
If you select Americas and press Enter , the following menu will appear.
Use the ▲ and ▼ buttons to cycle through the list of countries.