Datasat XD20, Инструкция по установке и эксплуатации

Страница: 26 / 254

XD20 Installation and Operating Guide Version 1.1
Document # 9301H264001.1 12
2.3.5. Loading a DTS Access™ Disc
DTS Access™ discs are always single discs labeled with the name of the feature film and the language of
the content on the disc. To load a DTS Access™ disc, follow these steps:
1. Start when “Ready” is displayed on the LCD screen on the XD20 front panel.
2. Open the drive (in the external drive unit), place the disc in the tray with the printed side up, and
close the tray. The XD20 will display information about the content being copied. For example:
The following message will appear when the load is complete.
3. Press Enter and the disc trays will open. Remove the disc from the tray and close
the tray.
DTS Access™ discs will load onto the XD20 even if the unit is not licensed for the discs.
However, they will only play back on XD20 units that have a CSS license.
2.3.6. Loading ACV
See Appendix K for information regarding creation of ACV playlists.
These menus apply whether the ACV is loaded from DVD or hard drive.
1. Start when “Ready” is displayed on the LCD screen on the XD20 front panel.
2. Open the drive (in the external drive unit), place the disc in the tray with the printed side up, and
close the tray. The XD20 will display information about the content being copied. The message
shown below displays while loading ACV content.