Datalogic AMT58 Series Скачать руководство пользователя страница 210

Страница: 210 / 435

GETTING STARTED

AMT58...PN

Diagnostics

Configuration of the diagnostics is integrated in the system in a user-friendly way and

activated with just one click. When new hardware components are introduced, the diag

nostic information is updated automatically via the engineering system (HWCN). System

diagnostics outputs all relevant information on existing errors in the system. This infor

mation is packaged automatically in messages containing the following elements:

• Module
• Message text
• Message status

To access the diagnostics function please proceed as follows.

1. Right-click on the module to process.

2. Select the Online & diagnostics command from the shortcut menu.

3. If there is no online connection established, click the Connect online button in the

Diagnostics entry.

4. The diagnostic status of the module will be displayed in the Diagnostic status

group in the Diagnostics folder in the Online and diagnostics view of the module

to be diagnosed.

The following status information is displayed in the Diagnostic status area:

• Status of the module as viewed by the CPU, for example:

- Module available and OK.
- Module defective.
- If the module experiences a fault and you have enabled the diagnostic error

interrupt during configuration, the “Module defective” status is displayed.

- Module configured, but not available.

Example: Diagnostics data is not available because the current online configura

tion differs from the offline configuration.

• Detected differences between the configured and the inserted module. Provided

it can be ascertained, the article number will be displayed for the set and actual

type.

The scope of the displayed information depends on the selected module.

Содержание AMT58 Series




















































































































































































































































































































































































































































Результаты поиска

Содержание AMT58 Series

Отзывы:

Похожие инструкции для AMT58 Series

Бренды по названию

Популярные бренды

Datalogic AMT58 Series, Руководство пользователя

Результаты поиска

Содержание AMT58 Series

Отзывы:

Похожие инструкции для AMT58 Series

Бренды по названию

Популярные бренды