DKM-430 User Manual Rev_02 Firmware V-1.8
K92D01-EN - 36 -
The unit is calibrated during factory production, but it is
possible to calibrate again.
Please select “
DEVICE CALIBRATION
” menu from
PROGRAMMING section.
Then select the input with
and
buttons and press
.
Then adjust the coefficient in order to display the correct
measured value on the screen and press
button in order
to save the new calibration and return to PROGRAMMING
section.
These parameters allow adjusting the battery backup real time clock of the module. Once set, the clock will
continue to run even if supply power is removed from the unit.
Parameter Definition
Unit
Min
Max
Description
Date
-
01
31
Current day of the month.
Month
-
01
12
Current month.
Year
-
00
99
Last two digits of the current year.
Hours
-
00
23
Current hour of the day.
Minutes
-
00
59
Current minute of the hour.
Seconds
-
00
59
Current second of the minute.
11.10. DEVICE CALIBRATION
11.11. ADJUST DATE AND TIME
MEASURED
VALUE
