DKM-430 User Manual Rev_02 Firmware V-1.8
K92D01-EN - 35 -
In this group various texts are entered. These texts appear at top of user screens, as special names for
digital inputs or analyzer module names.
In this group, restarting of demand periods and counter value settings are performed.
4 available user defined screens are configured through this menu.
There are 2 different character sizes that can be selected.
(5x7 and 10x14 pixels)
1) Please select character size with
and
buttons, then press
.
2) Please select the value to display through
“SELECT AN ITEM” menu, then press
.
For the next item to display, the menu returns to the
character size selection menu. Above steps 1 and 2 may
be repeated until the screen is full.
As long as the user stays in the user screen menu, the
current appearance of the screen will be on display.
When all available space is occupied, the menu is
automatically exited.
If required, the menu may be exited without filling the
screeen by holding
button pressed for 3 seconds.
11.9. USER SCREENS
11.8. DEMAND AND COUNTERS
11.7. USER INPUT SCREENS
