DKM-430 User Manual Rev_02 Firmware V-1.8
K92D01-EN - 19 -
POWER:
Turns on as long as energy is supplied to the unit.
COMM:
Flashes when the RS-485 Modbus communication is active.
ALARM:
Turns on in case of high level alarm (trip condition).
UYARI:
Turns on in case of warning.
The unit performs a detailed set of AC measurements. Displaying these parameters are organized under
PARAMETER GROUPS and subgroups.
Switching between parameter groups are made with
and
buttons.
Each depression of the
button switches the screen to the next parameter group. After the last group, the
first group is displayed again.
Each depression of the
button switches the screen to the previous parameter group. After the first
group, the last group is displayed again.
Switching within the same group is performed with
and
buttons.
Each depression of the
button switches the screen to the next display in the same group. After the last
display, the first display comes again.
Each depression of the
button switches the screen to the previous display in the same group. After the
first display, the last display comes again.
The list of
parameter groups
are below:
Channel Measurement Screens:
Voltage, current, kW, kVA, kVAr, pf and reactive ratio of each input
channel.
Channel Counter Screens:
Instantaneous current, demand current, demand power, active and reactive
energy counters of each input channel.
Main busbar voltages and frequency:
Phase-neutral, phase-phase and average voltages of the main
busbar in different screens.
GSM Modem Parameters:
Signal level, counters, connection status, IP addresses, etc...
Status Group:
Various information as date-time, firmware version, identity, configuration, etc...
User Screens:
Screens in this group are configured by the user.
Oscilloscope Screen:
In this group, waveforms of currents and voltages may be visualized as an
oscilloscope. All phase-neutral and phase-phase voltages and each current input are avalable. Thanks to
this feature, waveform distorsions and harmonic components are displayed in graphichal form.
Harmonic Analysis Result Tables:
In this group, THDs of currents and voltages are displayed with 0.1%
precision. All phase-neutral and phase-phase voltages and each current input are avalable.
6.3. LED FUNCTIONS
6.4. SCREEN SCROLLING
