Datakom DKM-430, Руководство пользователя

Страница: 29 / 48

DKM-430 User Manual Rev_02 Firmware V-1.8
K92D01-EN - 29 -
Parameter Definition Unit Min Max Factory
Set
Description
Reactive Power
Capacitive Alarm
kVAr 0 400 0
If the reactive power of any channel is
capacitive and goes above this limit,
this will cause an alarm.
If this limit is 0 then the alarm is not
controlled.
Reactive Power Inductive
Alarm
kVAr 0 400 0
If the reactive power of any channel is
inductive and goes above this limit, this
will cause an alarm.
If this limit is 0 then the alarm is not
controlled.
Reactive Power Alarm
Duration
sec 0 255 1
If the reactive power of any channel
goes outside of the limits during this
timer, a reactive power alarm will occur.
Reactive Power Alarm
Lock Enable
- 0 1 1
0: alarm non latching
1: latching alarm
Power Factor Capacitive
Alarm
- 0.000 1.000 0.000
If the power factor of any channel is
capacitive and goes below this limit, this
will cause an alarm.
If this limit is 0 then the alarm is not
controlled.
Power Factor Inductive
Alarm
- 0.000 1.000 0.000
If the power factor of any channel is
inductive and goes below this limit, this
will cause an alarm.
If this limit is 0 then the alarm is not
controlled.
Power Factor Alarm
Duration
sec 0 255 1
If the power factor of any channel goes
outside of the limits during this timer, a
power factor alarm will occur.
Power Factor Alarm Lock
Enable
- 0 1 1
0: alarm non latching
1: latching alarm
Current High Alarm A 0 5000 0
If the current of any channel goes
above this limit, this will cause an alarm.
If this limit is 0 then the alarm is not
controlled.
Current High Alarm
Duration
sec 0 255 1
If the current of any channel goes
outside of the limits during this timer, a
current alarm will occur.
Current Alarm Lock
Enable
- 0 1 1
0: alarm non latching
1: latching alarm
THD-V Alarm % 0 100 0
If theTHD of any voltage goes above
this limit, this will cause an alarm.
If this limit is 0 then the alarm is not
controlled.
THD-V Alarm Duration sec 0 255 1
If the THD of any voltage goes outside
of the limits during this timer, a THD-V
alarm will occur.
THD-V Alarm Lock
Enable
- 0 1 1
0: alarm non latching
1: latching alarm
11.2. ELECTRICAL PARAMETERS GROUP (continued)