Danfoss VLT DriveMotor FCP 106, Руководство по конструкции

Страница: 3 / 82

Contents
1 Introduction
5
1.1 Purpose of the Design Guide 5
1.2 Additional Resources 5
1.3 Symbols, Abbreviations, and Conventions 5
1.4 Approvals 6
1.4.1 What is Covered 6
1.4.2 CE Mark 7
1.4.2.1 Low Voltage Directive 7
1.4.2.2 EMC Directive 7
1.4.2.3 Machinery Directive 7
1.4.2.4 ErP Directive 7
1.4.3 C-tick Compliance 8
1.4.4 UL Compliance 8
1.4.5 Export Control Regulations 8
1.5 Software Version
8
1.6 Disposal Instructions
8
1.7 Safety
8
1.7.1 General Safety Principles 8
2 Product Overview
10
2.1 Introduction
10
2.1.1 Gasket 10
2.1.2 Key Diagram 11
2.1.3 Electrical Overview 12
2.1.4 Control Terminals and Relays 3 13
2.1.5 Serial Communication (Fieldbus) Networks 14
2.2 VLT
®
Memory Module MCM 101 14
2.2.1 Configuring with the VLT
®
Memory Module MCM 101 15
2.2.2 Copying Data via PC and Memory Module Programmer (MMP) 15
2.2.3 Copying a Configuration to Several Frequency Converters 16
2.3 Control Structures 17
2.3.1 Control Structure Open Loop 17
2.3.2 Control Structure Closed Loop (PI) 18
2.4 Local (Hand On) and Remote (Auto On) Control 18
2.5 Feedback and Reference Handling 19
2.6 General Aspects of EMC 20
2.7 Leakage Current 26
2.7.1 Ground Leakage Current 26
2.8 Galvanic Isolation (PELV) 27
Contents Design Guide
MG03M202 Danfoss A/S © 06/2016 All rights reserved. 1