Danfoss VLT AQUA Drive FC 202, Руководство по конструкции, Страница: 85 / 218

Type designation P11K P15K P18K P22K P30K P37K
Protection ratings IP21, IP55, IP66 maxi-
mum cable cross-section
(2)
for mains,
brake, and load sharing [mm
2
(AWG)]
16, 10, 10 (6, 8, 8) 38, –, – (2, –, –)
Protection ratings IP21, IP55, IP66 maxi-
mum cable cross-section
(2)
for motor
[mm
2
(AWG)]
10, 10, – (8, 8, –) 35, 25, 25 (2, 4, 4)
Maximum cable crosssection
(2)
for mains
disconnect [mm
2
(AWG)]
16, 10, 10 (6, 8, 8) 50, 35, 35 (1, 2, 2)
Estimated power loss
(3)
at rated maxi-
mum load [W]
(4)
220 300 220 300 300 370 370 440 440 600 600 740
Efficiency
(5)
0.98
1
High overload=150% or 160% torque for a duration of 60 s. Normal overload=110% torque for a duration of 60 s.
2 The 3 values for the maximum cable cross-section are for single core, flexible wire, and flexible wire with sleeve, respectively.
3
Applies for dimensioning of drive cooling. If the switching frequency is higher than the default setting, the power losses may increase. LCP and
typical control card power consumptions are included. For more detailed efficiency values and part load losses according IEC/EN 61800-9-2 refer to
mydrive ecosmart on www. danfoss.com . For efficiency class see 8.4.1 Environment .
4 Efficiency measured at nominal current. For more detailed efficiency values and part load losses according IEC/EN 61800-9-2 refer to mydrive ecos-
mart on www. danfoss.com . For efficiency class see 8.4.1 Environment .
5 Measured using 5 m (16 ft) shielded motor cables at rated load and rated frequency. For more detailed efficiency values and part load losses ac-
cording IEC/EN 61800-9-2 refer to mydrive ecosmart on www. danfoss.com . For efficiency class see 8.4.1 Environment .
Table 38: Mains supply 3x525–600 V AC, P45K–P90K
Type designation P45K P55K P75K P90K
High/normal overload
(1)
HO NO HO NO HO NO HO NO
Typical shaft output [kW] 37 45 45 55 55 75 75 90
Typical shaft output [hp] 50 60 60 75 75 100 100 125
Protection rating IP20/Chassis C3 C3 C4 C4
Protection rating IP21/Type 1
Protection rating IP55/Type 12
Protection rating IP66/NEMA 4X
C1 C1 C2 C2
Output current
Continuous (3x525–550 V) [A] 54 65 65 87 87 105 105 137
Intermittent (3x525–550 V) [A] 81 72 98 96 131 116 158 151
Continuous (3x525–600 V) [A] 52 62 62 83 83 100 100 131
Intermittent (3x525–600 V) [A] 78 68 93 91 125 110 150 144
Continuous kVA at 525 V [kVA] 51.4 61.9 61.9 82.9 82.9 100 100 130.5
Continuous kVA at 575 V [kVA] 51.8 61.7 61.7 82.7 82.7 99.6 99.6 130.5
Maximum input current
Continuous at 550 V [A] 49 59 59 78.9 78.9 95.3 95.3 124.3
Intermittent at 550 V [A] 74 65 89 87 118 105 143 137
AJ300847815559en-000101 / 130R0337 | 85 Danfoss A/S © 2020.09
Specifications
VLT® AQUA Drive FC 202
Design Guide