manualshive.com logo in svg

Danfoss VLT AQUA Drive FC 202, Руководство по конструкции, Страница: 56 / 218

Поделиться
Скачать
Danfoss VLT AQUA Drive FC 202 Скачать руководство пользователя страница 56

•
•
•
•
•

7 Options and Accessories Overview

7.1 Introduction

Danfoss offers an extensive range of options and accessories.
This chapter provides an overview of the different hardware options and accessories for the VLT

®

 FC drive series:

Fieldbus options
Functional extensions
Programmable controllers
Power options
Kits and accessories

7.2 VLT® FC Series Options Concept

Options are used to add extra features to the drive. That allows tailoring the drive to the specific need and application.
The drives have 4 option slots (A, B, C, and D).

4

3

2

1

e3

0b

u3

25

.1

0

Illustration 41: Option Slots on a VLT

®

 FC Series Drive (Example Compact Enclosure)

1

A option

2

B option

3

D option

4

C option

The A-slot options are typically communication options, for example, for adding fieldbus functionality.
The B-slot options typically host functional extension options.
The C-slot options host special function options, for example for advanced cascade control.
The D-slot option is used for an external power supply and for the real-time clock.
The options are slot-specific. So an A-option does only fit in an A-option slot.
Some options are drive-specific, as they require an application-specific operating system in the drive.
Some additional functionalities are not implemented via hardware options, but via specific software options, for example Digital
Cascade Controller.
For a more detailed overview of available options, download the 

VLT® Drives FC Series Options Portfolio

 from 

www.danfoss.com

.

AJ300847815559en-000101 / 130R0337

56 | Danfoss A/S © 2020.09

Options and Accessories Overview

VLT® AQUA Drive FC 202

Design Guide

Содержание VLT AQUA Drive FC 202



























































































































































































































Отзывы:

Нет отзывов