Danfoss AK2-SC 255 Скачать руководство пользователя страница 148 | Manualshive

Страница: 148 / 206

Danfoss AK2-SC 255 Скачать руководство пользователя страница 148

RS.8D.M1.22

AK2-SC 255 Reference Manual

147

Now the screen looks like the one at right below.

Move (right) to the next field and select the compressor room temperature (which we
called Comp Rm Temp and assigned to Bd-Pt 05-2. Now the screen will appear as
below:

Notice that after the selection is made, the value field for the sensor changes from ?
(error) to 0.0°F.

Still in the data definitions area, select the blank in the second line under Name and
open the list box. This time, select Number °F from the list (be careful, there are
several Number items). The screen will look as at left below. Move right to the data
definition and change 0.0°F to 90.0°F, which is the temperature setpoint in the strat-
egy we are creating, and the screen will appear as at right. Again, the value field has
changed to reflect the value of the defined point.

«
...
146
147
148
149
150
...
»

Содержание AK2-SC 255















































































































































































































Отзывы:

Нет отзывов