Xtium2-CL MX4 User's Manual
Installing Xtium2-CL MX4
•
25
Information Field Description
Field
Description
Serial Number
[Read-Only]: Serial Number of the board
Hardware ID
[Read-Only]: This field identif ies hardware changes that affect the
operation of the board. Currently there are no such changes.
Hardware
Configuration
[Read-Only]:
This field will state the presence or absence of optional
components. The value is:
•
0x0000000000000001
Bit 0:
Both Shaft Encoder RS-422 and TTL input is supported.
User Interface Outputs [Read-Only]: Number of available user interface outputs on the
board. The value is 9.
P/N
[Read-Only]: Indicates the part number of the board. The value is:
•
OR-A4C0-XMX00
P/N Revision
[Read-Only]: Indicates the revision of the part number.
GPO Buffer Type
[Read-Only]: Indicates the type of GPO buffer on the board. Possible
values
•
NC7WZ241L8X
•
NC7WZ125L8X
User Data
[Read/Write]: This is a 64 byte general purpose user storage area.
For information on how to read/write this field at the application
level, contact Teledyne DALSA Technical Support.
User Interface GIOs
Default Input Level
[Read/Write]: Use this field to select the default input level of the
User Interface GIOs.
Click on the ‘Value’ field to select the input signal level detection
required.
By default, boards are shipped with User Interface General Inputs set
to 24V. Note that the input level can also be modified at the
application level.
Open Interface GIOs
Reservation
[Read/Write]: Use this field to reserve Open Interface GIOs for use
by the acquisition module.
To specify the open interface GIO reservations, click on the ‘Value’
field. Disable any GIO reservations that are not required. Click OK to
update the value field.
