background image

Quick Reference Guide

RP-4

Control Processor

The RP-4 Control Processor is a powerful central controller that is designed for reliable control of audio/
video and other electronic systems. It combines an integrated 433MHz RF receiver, four assignable IR ports, 
relays, support for the RTiPanel App (ver 1.2 or higher) and more — all in a small, cost-effective package. 
The RP-4 is the perfect control processor for single room installations such as home theaters, media centers, 
and bedrooms.

The RP-4 provides superior quality and reliability as well as these features:

• Stores all system commands and macros for reliable control.
• Integrated 433MHz RF receiver.
 • Four infrared ports with routing and output adjustment.
•  Supports RTiPanel App for one-way control via smart phones and tablets.
• Two voltage sense inputs for reliable, predictable control of devices.
• Two programmable relay outputs.
• Works with all RTI 433MHz wireless interfaces.
• RF signal reception LED.
• USB and Ethernet programming.

Содержание RP-4

Страница 1: ...ntrol processor for single room installations such as home theaters media centers and bedrooms The RP 4 provides superior quality and reliability as well as these features Stores all system commands and macros for reliable control Integrated 433MHz RF receiver Four infrared ports with routing and output adjustment Supports RTiPanel App for one way control via smart phones and tablets Two voltage s...

Страница 2: ... marked locations 3 Insert the drywall anchors included into the holes and tap until they are flush with wall 4 Align mounting bracket with drywall anchors and screw using supplied 6 32 screws bracket to wall NON DRYWALL EX Wood Panelling 1 Level the RP 4 mounting bracket in the desired location and mark the fastener holes with a pencil 2 Pre drill holes into surface in marked locations NOTE The d...

Страница 3: ... NOTE The RP 4 does not support control of devices via IP USB PORT A standard USB B port the type found on most printers is used to download the Integration Designer programming software or firmware updates into the RP 4 programming operation PROGRAMMING THE RP 4 The RP 4 must be programmed to operate All programming is done using RTI s Integration Designer software and is downloaded using the USB...

Страница 4: ...d Warnings Adhere to all warnings on the unit and in the operating instructions Heat Keep the unit away from heat sources such as radiators heat registers stoves etc including amplifiers that produce heat Power Sources Connect the unit only to a power supply of the type described in the operating instructions or as marked on the unit Power Cord Protection Route power supply cords so that they are ...

Отзывы: