98
•
Declarations of Conformity
Xtium2-CL MX4 User's Manual
CL-1: Camera Link Connector 1
Name
Pin #
Type
Description
BASE_X0-
25
Input
Neg. Base Data 0
12
Input
Pos. Base Data 0
BASE_X1-
24
Input
Neg. Base Data 1
11
Input
Pos. Base Data 1
BASE_X2-
23
Input
Neg. Base Data 2
10
Input
Pos. Base Data 2
BASE_X3-
21
Input
Neg. Base Data 3
8
Input
Pos. Base Data 3
BASE_XCLK-
22
Input
Neg. Base Clock
BA
9
Input
Pos. Base Clock
SERTC+
20
Output
Pos. Serial Data to Camera
SERTC-
7
Output
Neg. Serial Data to Camera
SERTFG-
19
Input
Neg. Serial Data to Frame Grabber
6
Input
Pos. Serial Data to Frame Grabber
CC1-
18
Output
Neg. Camera Control 1
CC1+
5
Output
Pos. Camera Control 1
CC2+
17
Output
Pos. Camera Control 2
CC2-
4
Output
Neg. Camera Control 2
CC3-
16
Output
Neg. Camera Control 3
CC3+
3
Output
Pos. Camera Control 3
CC4+
15
Output
Pos. Camera Control 4
CC4-
2
Output
Neg. Camera Control 4
PoCL
1,26
+12 V (see note following table)
GND
13, 14
Ground
Notes on PoCL support:
▪
Refer to Sapera
’s parameter CORACQ_PRM_POCL_ENABLE to enable PoCL and
CORACQ_PRM_SIGNAL_STATUS/CORACQ_VAL_SIGNAL_POCL_ACTIVE to verify if the PoCL is
active. See also + reference parameter SapAcquisition::SignalPoCLActive for the
current state.
▪
PoCL state is maintained as long as the board is not reset
