Daikin Rebel Applied DPSA Скачать руководство пользователя страница 99

Страница: 99 / 162

Unit Maintenance

www.DaikinApplied.com 99

IM 1287-4 • REBEL APPLIED ROOFTOP

Restart

After extended storage, perform a complete start up. Inevitable

accumulations of dirt, insect nests, etc. can contribute to

problems if not cleaned out thoroughly prior to start up. In

addition, thermal cycling tends to loosen mechanical and

electrical connections. Following the startup procedure helps

discover these and other issues that may have developed

during the storage interval.

Gas Furnace

For information on maintenance of the gas furnace, refer to

“Daikin Tubular Gas Heater Series” on page 111

On Daikin equipment that includes the extended 2nd -5th year

compressor warranty option, the replacement compressor must

be ordered through the Daikin Parts Department (Minneapolis).

1. Contact the Daikin Parts Department for compressor

availability.

2. Send the Daikin Parts Department a completed parts

order form.

3. The Parts Department will process the order and the

compressors will be shipped from our Dayton, OH

warehouse via ground transportation. If next-day air is

required, you will need to indicate this on the parts order

form and a freight charge will be billed to your account.

Air freight costs are not covered under the Daikin

warranty.

4. After the failed compressor has been replaced, it must

be returned to Daikin with a Return Goods Tag attached.

You will receive the tag in the mail and it must be

attached to the compressor. The Return Goods Tag will

have instructions on where to send the compressor. If

the compressor is not returned, you will be billed for the

replacement compressor.

5. Consideration may be given at this time to a compressor

teardown analysis, depending on the history of failures.

Содержание Rebel Applied DPSA



































































































































































Результаты поиска

Содержание Rebel Applied DPSA

Отзывы:

Бренды по названию

Популярные бренды

Daikin Rebel Applied DPSA, Руководство по установке и запуску

Результаты поиска

Содержание Rebel Applied DPSA

Отзывы:

Бренды по названию

Популярные бренды