![background image](http://html.mh-extra.com/html/daikin/ftxz25nv1b/ftxz25nv1b_service-manual_2459562095.webp)
SiMT041311E
Operation Manual
Installation / Operation Manual
80
Indoor unit ON/OFF switch
6
X
Page 35
X
Page 39
Streamer unit
X
Page 36
X
Page 39
(inside the unit)
(inside the unit)
X
Page 37
X
Page 38
INTELLIGENT EYE sensor
Outdoor unit
Drain outlet
(rear side of the bottom)
Drain hose
Model name plate
Humidifying unit air inlet
Humidifying unit
Air inlet
Air outlet
When the front panel is open
Display unit
Detects human motion to
confirm that a person is in
the area.
• Press to start the operation with the mode set to
“AUTO” and airflow rate to “AUTO”.
Press the button again to stop the operation.
• Use this button when no remote controller is
immediately available.
Air supply filter (black)
Removes dust taken in from
the outdoor air.
Humidifying temperature
and humidity sensor
Dust box
Air filter (white)
Detects the temperature and
humidity of the humidified air to
control the degree of humidity.
Scrapes dust off the air filter with the dust
brush and collects it.
(2 locations at right and left)
Prevents mold and allergens
with the decomposition power
of the streamer discharge.
Photocatalytic air-
purifying and
deodorising filter
(black)
Indoor temperature
and humidity sensor
Adsorbs mold, allergens and
odour.
Detects the temperature and
humidity in the room.
Humidifying unit air
outlet
(side and back)
(front and back)
Drains water out from the outdoor unit during HEATING or
HUMID HEATING operation.
Outdoor temperature sensor
Refrigerant pipes, inter-unit
wire and humidifying hose
Earth terminal
(front)
(back)
Detects the outdoor temperature.
(inside)
Drains water from the indoor unit
during COOLING, “SARARA” DRY or
DRY COOLING operation.