Operation Manual
SiMT041311E
109
Installation / Operation Manual
35
INTELLIGENT EYE sensor
Streamer unit
X
Page 36
Dust box / Dust brush
X
Page 37
X
Page 39
X
Page 39
X
Page 38
Front panel
Front panel shaft
Front panel shaft
Shaft hole
Front panel
How?
Indoor unit / INTELLIGENT EYE sensor
Cleaning (for service personnel)
CAUTION
Front panel
Air supply filter (black)
Air filter (white)
(in the right and left sides)
• Be sure to stop the operation and turn off the circuit breaker before cleaning.
• For care and cleaning, call service personnel.
Photocatalytic air-purifying
and deodorising filter (black)
When?
When you find dirt or dust.
• Wipe gently with a soft cloth moistened with water or neutral
liquid detergent.
• Make sure to clean the back of the front panel.
CAUTION
• When removing and attaching the front panel, stand on a
solid, stable base and take care not to fall.
• When removing and attaching the front panel, support the
panel securely with your hands to prevent it from falling.
Removing the front panel
• Pushing further up from the stopping position allows the
panel to be removed more easily.
1.
Turn off the circuit breaker.
2.
Hold the panel at both ends and
open until the panel stops.
• While pushing the left-side front panel shaft outward, push
up the front panel and remove it. (Remove the right-side front
panel shaft in the same manner.)
• After removing both front panel shafts, pull the front panel
toward yourself and remove it.
3.
Remove the front panel.
1.
Insert the right and left front panel
shafts on the front panel into the
shaft holes one at a time.
2.
Close the front panel slowly and
press on both sides of the front panel.
Attaching the front panel
Confirm that the front panel is securely installed.
How?
• Wipe gently with a soft, dry cloth.
• Make sure to clean the lens part of the INTELLIGENT EYE
sensor.
When?
When you find dirt or dust.