![background image](http://html.mh-extra.com/html/daikin/ftxz25nv1b/ftxz25nv1b_service-manual_2459562135.webp)
SiMT041311E
Operation Manual
Installation / Operation Manual
120
46
Call the service shop immediately
WARNING
If one of the following symptoms takes place, call the service shop immediately.
X
Page 27
Disposal requirements
Important information regarding the refrigerant used
When an abnormality (such as a burning smell) occurs, stop operation and turn the circuit breaker off.
• Continued operation in an abnormal condition may result in troubles, electric shocks or fire.
• Consult the service shop where you bought the air conditioner.
Do not attempt to repair or modify the air conditioner by yourself.
• Incorrect work may result in electric shocks or fire.
• Consult the service shop where you bought the air conditioner.
Turn off the circuit breaker and call the
service shop.
• The power cord is abnormally hot or damaged.
• An abnormal sound is heard during operation.
• The circuit breaker, a fuse, or the earth leakage circuit breaker
cuts off the operation frequently.
• A switch or a button often fails to work properly.
• There is a burning smell.
• Water leaks from the indoor unit.
After a power failure
• The air conditioner automatically resumes operation in about 3 minutes. You should just wait for a while.
• When AUTO RESTART is “Off”, start the operation using the remote controller.
Lightning
• If lightning may strike the neighbouring area, stop operation and turn the circuit breaker off for system protection.
When not in use for extended periods
1) Perform MOLD PROOF operation on a sunny day to dry the inside well. (How to perform MOLD PROOF operation. )
2) After operation is stopped, turn off the circuit breaker for the air conditioner.
3) Remove the batteries from the remote controller.
• To resume using the air conditioner, turn on the circuit breaker. The air conditioner performs the operating check of each part.
Your product and the batteries supplied with the controller are marked with this symbol. This symbol means that electrical
and electronic products and batteries shall not be mixed with unsorted household waste.
For batteries, a chemical symbol can be printed beneath the symbol. This chemical symbol means that the battery
contains a heavy metal above a certain concentration. Possible chemical symbols are:
Pb: lead (>0.004%)
Do not try to dismantle the system yourself: the dismantling of the product, treatment of the refrigerant, of oil and of other parts must be
done by a qualified installer in accordance with relevant local and national legislation.
Units and waste batteries must be treated at a specialized treatment facility for re-use, recycling and recovery.
By ensuring correct disposal, you will help to prevent potential negative consequences for the environment and human health.
Please contact the installer or local authority for more information.
• This product contains fluorinated greenhouse gases covered by the Kyoto Protocol.
Refrigerant type:
R32
GWP
(1)
value:
550
*
(1)
GWP = global warming potential
• Periodical inspections for refrigerant leaks may be required depending on European or local legislation. Please contact your local dealer
for more information.
* This value is based on F gas regulation (824/2006).
3P338603-1C