SiMT041311E
Operation Manual
Installation / Operation Manual
112
38
X
Page 28
Attention
PULL
PULL
1)
2)
3)
Rail
PULL
X
Page 28
When you clean the filters, open the front panel and remove the dust box.
Air filter (white)
Display unit (black)
Air filter
Grips (blue)
1) Hold the PULL tab on the display unit (black), direct the
unit upward.
2) Raise the grips of the air filter (blue) upward to the front.
3) Pull the grips downward.
Pull down
2.
Pull out the air filter.
Filter holding frame (yellow)
• The tabs of the filter holding frame (yellow) are provided one
on each side.
1.
Pull down the filter holding frame
(yellow).
Attaching the air filter
How?
• Use a vacuum cleaner to remove dust.
• If you cannot remove dirt or dust completely, soak the filter in
lukewarm water with neutral liquid detergent and clean with a
sponge.
• After washing the filter, drain it.
• Smooth the filter by hand and dry it well in the shade.
• Do not disassemble the air filter.
When?
When you find dirt or dust.
If the AUTO CLEANING FILTER operation is set to “On”, basically
no care is required.
When you are aware of dirt, such as when oil or nicotine is
attached to the air filter or when the AUTO CLEANING FILTER
operation is set to “Off”, clean the filter.
Display unit (black)
Grips (blue)
Filter holding frame (yellow)
2.
Push up the filter holding frame
(yellow) until it clicks.
If the frame is not securely locked, the front panel may be
damaged.
After cleaning, start the CLEANING FILTER operation to
check that the air filter operates correctly.
• After attaching the air filter, direct the display unit (black)
downward.
1.
Hold the grips (blue) and insert the
filter along the rail.