background image

Operation Manual

Use smart and save smart

¡

Thank you for purchasing intelligent Touch Controller.

¡

This operation manual contains notes for safe use of the 
product.

For correct use, be sure to read this manual 
carefully before use.

¡

When you have read this manual, be sure to store it in a 
place where the operator can conveniently refer to at 
anytime.

 

In case of personnel change, be sure to give the manual 
to the new operator.

Model

DCS601C51

Maintenance

Precautions

96

Maintenance

LCD Maintenance

97

When Leaving the Product 
Turned OFF for a Long Time

97

Troubleshooting

98

Maintenance

For Your Information

Before use

Operation

Before use

Safety Precautions

Be sure to follow the instructions below

 

1

System Overview

3

Features and Functions

4

Part Names and Functions

5

Part Names on the Monitoring 
Screen and the Functions

List

7

Icon

9

Operation

Operation
Quick Reference

13

Air Conditioner Operation

15

Monitoring Operation of Air Conditioner

26

System Setup Menu

32

For Your Information

Options

106

Specification

107

After-sales Service

108

Содержание DCS601C51















































































































Отзывы: