22
Screen 1 Monitoring
1.
On Screen 1 Monitoring, select a zone
or a group from button
q
.
Change the setting of operation with the remote
control of air conditioners between Permitted and
Prohibited.
On the Monitoring screen, operation is allowed
with either Icon or List as the display type.
The setting between Permitted and Prohibited
can be changed by zone or by group.
2.
Select with
w
a zone or a group for which
the setting of the range of operation
allowed with remote control is to be reset.
3.
4.
Press the [Advanced Settings] button
r
.
Screen 3 Advance Settings is displayed.
5.
Then make setting with the pull-down
menus
t
-
u
.
There are three settings as shown below:
t
Start/Stop
Prohibited
Stop Only
Permitted
No change
y
Operation Mode
Permitted
or
Prohibited
No change
u
Setpoint
Permitted
or
Prohibited
No change
Changing the Range of Operation Allowed with Remote Control
Screen 2 Operation
6.
1
3
2
4
9
8
Screen 3 Advanced Settings
5
6
7
To cancel the setting, press the
[Cancel] button.
Screen 2 Operation is displayed again.
To cancel the setting, press the
[Cancel] button.
Press the [OK] button
i
after setting
t
-
u
.
Then press the [OK] button
o
on Screen
2 Operation.
Item
Setting
Meaning
Start/Stop
Prohibited
The remote control cannot
start or stop operation.
The remote control can start
or stop operation.
The remote control can
change the operation mode.
The remote control cannot
change the operation mode.
The remote control can change
the temperature setting.
The remote control cannot
change the temperature setting.
The remote control can stop the
operation of air conditioners in
operation but cannot start air
conditioners not in operation.
Stop Only
Permitted
Permitted
Prohibited
Permitted
Prohibited
Operation
Mode
Setpoint
[Procedure]
[Details of Setting]
Press the [Configure] button
e
.
Screen 2 Operation is displayed.
Oper
ation
