Daikin DCS601C51, Руководство по эксплуатации

Страница: 90 / 110

Screen 1 History
Screen 2 Operation History
Screen 3 Auto-control history
1.
Select History at Screen 2(A) on page
63.
2.
The History screen Screen 1 appears
as shown in the left-hand column.
3.
4.
To return to the History screen, touch the
[Close] button
t
.
5.
When checking for the history of
automatic control operations, touch the
[Auto-control history] button
w
to
confirm that the Auto-control history
screen Screen 3 is displayed.
6.
Use the pulldown menu
y
to display
the following items on the related
screens :
¡ Schedule History
Use this item to display log records
on schedule execution.
¡ Heating opt. cntl. History
Use this item to display log records
on optimal stop control during heating.
¡ Temperature Limit. History
Use this item to display log records on upper-
/ lower-limit control for the room temperature.
¡ Simple Interlock History
∗
After activating optional software, additional
items are displayed from the drop-down
menu
y
.
¡ Power prop. division History
¡ E-mail History
∗
4 items shown above except the item Power
prop. division History disappear when
turning off the power of the contoroller.
7.
To return to the History screen Screen
1, touch the [Close] button
u
.
9.
After checking the log record, touch the
[Close] button
r
.
8.
When saving the stored log records in a
memory card, insert a commercially
available PCMCIA flash memory card into a
slot provided at the left side of the controller
and touch the [Output to file] button
e
.
∗
Care should be taken for memory
card insertion. Be sure to insert a
memory card in such a way that the
rear side of the card (not provided
with a label for the manufacturer
name and model name) should face
upwards.
When the memory card has been
forcibly inserted in wrong direction,
the controller may be damaged.
Then, touch the [OK] button to save the
log records in the memory card.
Check for History
1
6
2
3
5
4
7
When checking for the history of
system settings operations, touch the
[Operation history] button
q
to confirm
that the Operation history screen
Screen 2 is displayed. The system
settings operations recorded in the
controller are displayed in the order
where they have been performed.
System Settings Menu Operation
89