－
16
－
7. TRANSPORT AND INSTALLATION
(Continued)
CAUTION
Follow the instructions below when selecting an installation place for the
welding power source.
Do not install the welding power source in a place subject to direct sunlight and rain.
Place the welding machine on a strong and stable surface.
Do not block the ventilating hole on the welding machine.
Install the welding machine in a place where the ambient temperature is between –10°C
and 40°C.
Do not install the welding machine in a place where metal material such as spatter enters
the welding power source.
Keep an installation distance of 30cm between the welding power source and the wall or
other welding power.
Install a wind shield to protect arc from wind.
Fix the gas cylinder to a stand specifically made for gas cylinder.
Do not put heavy things on the welding power source.
Install the welding machine, wire feeder, torch, and control cables(including extension
cables) in a place that water may not be splashed.
Place it in a location with an altitude not more than 1,000 meters.
Fix the gas cylinder in place to prevent it from toppling.
Fix the wheels in place to prevent the welding power source from sliding.
Wminfo
