Daihen CPVE-400, Руководство пользователя

Страница: 17 / 87

－
15
－
7. TRANSPORT AND INSTALLATION (continued)
7.2 Installation
WARNING
When installing the welding machine, follow the instructions below to avoid a fire caused by
welding or physical injury from gas fumes.

Do not place the welding machine near combustibles or flammable
gases.

Remove combustible materials to prevent dross coming into contact with
combustible objects. If that is not possible, cover them with
noncombustible covers.

To avoid gas poisoning and risk of suffocation, wear a gas mask or
adequately ventilate when the welding machine is used in a place
regulated by a local law.

To prevent injury or poisoning caused by fume, wear a gas mask or
weld at a partial exhaust facility approved by local regulations.

Adequately ventilate or wear a gas mask when using the welding
machine in a tank, boiler, or the hold of a ship. Heavier gases such as
carbon dioxide or argon gases tend to collect there.

When using the welding machine at a narrow space, comply with a
trained supervisor’s directions. And be sure to wear a gas mask.
CAUTION
To prevent electromagnetic troubles, read the following.
Also, if electromagnetic troubles occur, check the following again.

Change the placement of the welding power source.

Put the input cable in a grounded metal conduit.

Shield the whole welding places from electromagnetic trouble. If
electromagnetic troubles are still not solved after following the above
instructions, consult your dealer.
Wminfo