Dahua Technology IVSS Скачать руководство пользователя страница 662

Страница: 662 / 688

User's Manual

333

Step 1

On the LIVE page, click

, and select MAINTAIN > Device Maintain > Update > AI

Module.

Step 2

Click File upgrade.

Step 3

Click Browse to select an update file.

Step 4

Click Upgrade Now.

Step 5

Click OK.
The system starts updating. Device automatically restarts after successfully updated.

9.7.1.3 Updating Cameras

You can import the update file to update cameras. The update file extension name shall be .bin.

●

During update, do not disconnect from power and network, and reboot or shut down the Device.

●

Make sure that the update file is correct. Improper update file might result in device error!

You need to obtain the correct update file and save it in the corresponding path.

●

When operating on the local interface, save the update file in the USB storage device and then

connect the USB storage device to the IVSS.

●

When operating on the web or PCAPP interface, save the update file on the PC in which the Web

or PCAPP is located.

Step 1

On the LIVE page, click

, and select MAINTAIN > Device Maintain > Update > Camera

Update.

Step 2

Select one or more cameras and then click File upgrade.

Stop recording before update. If you are updating a camera that is recording, the following
prompt will pop up.

Figure 9-11 Prompt

Step 3

Click Browse to select an update file.

Step 4

Click Upgrade Now.

Step 5

Click OK.

9.7.2 Default

When the system runs slowly and has configuration errors, try to solve the problems by restoring the
default settings.

All configurations are lost after factory default operation.
Step 1

On the LIVE page, click

, and then select MAINTAIN > Device Maintain > Default.

Содержание IVSS

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IVSS

Отзывы:

Похожие инструкции для IVSS

Бренды по названию

Популярные бренды

Dahua Technology IVSS, Руководство пользователя

Результаты поиска

Содержание IVSS

Отзывы:

Похожие инструкции для IVSS

Бренды по названию

Популярные бренды