manualshive.com logo in svg

D-Link DXS-3600-16S, Руководство пользователя

D-Link DXS-3600-16S - мощный коммутатор с возможностью управления, предназначенный для организации надежных сетей. На нашем сайте вы можете бесплатно загрузить руководство по быстрой установке и другие руководства для этого устройства. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide

27

protocol

Specifies the name or number of an IP protocol used. Names that can be used are 
'eigrp', 'esp', 'gre', 'igmp', 'ip', 'ipinip', 'ospf', 'pcp', 'pim', 'tcp', 'udp', 'icmp' or an integer 
in the range 0 to 255 representing an IP protocol number. This field is used to match 
any Internet protocol. There are additional specific parameters for ‘tcp’, ‘udp’, and 
‘icmp’. The ‘ip’ means any IP Protocol.

operator

(Optional) Specifies the operator used. Possible operators include ‘eq’ (equal), ‘gt’ 
(greater than), ‘lt’ (less than), ‘neq’ (not equal), and ‘range’ (inclusive range). A range 
needs two port numbers, while other operators only need one port number.

port

Specifies the Layer 4 port number as a decimal number (from 0 to 65535) or the 
name of a L4 port. 

TCP port names used:

'bgp', 'chargen', 'daytime', 'discard', 'domain', 'echo', 'rexec', 'finger', 'ftp', 'ftp-data', 

'gopher', 'hostname', 'ident', 'irc', 'klogin', 'kshell', 'login', 'lpd', 'nntp', 'snpp', 
'pop2', 'pop3', 'smtp', 'sunrpc', 'shell', 'tacacs', 'telnet', 'time', 'uucp', 'whois', 
'http'.

UDP port names used:

'biff', 'bootpc', 'bootps', 'discard', 'irc', 'domain', 'echo', 'isakmp', 'mobile-ip', 

'nameserver', 'netbios-dgm', 'netbios-ns', 'netbios-ss', 'nat-t', 'ntp', 'snpp', 'rip', 
'snmp', 'snmptrap', 'sunrpc', 'syslog', 'tacacs', 'talk', 'tftp', 'time', 'who', 'xdmcp'.

precedence

 precedence

(Optional) Packets can be filtered by their precedence level. This is specified by a 
number from 0 to 7 or by name. Names that can be used are routine (0), priority (1), 
immediate (2), flash (3), flash-override (4), critical (5), internet (6), network (7).

tos

 tos

(Optional) Packets can be filtered by their type of service level. This is specified by a 
number from 0 to 15 or by name. Names that can be used are normal (0), max-
reliability (2), max-throughput (4), min-delay (8), min-monetary-cost (1).

fragments

(Optional) Specifies packet fragment filtering.

time-range

 time-range-

name

(Optional) Specifies the name of the time-period profile associated with the access-
list delineating its activation period.

tcp-flag

(Optional) Specifies the TCP flag fields. The specified TCP header bits can be ‘ack’ 
(acknowledge), ‘fin’ (finish), ‘psh’ (push), ‘rst’ (reset), ‘syn’ (synchronize), or ‘urg’ 
(urgent).

icmp-type

(Optional) Specifies the ICMP message type. The valid number for the message type 
is from 0 to 255.

icmp-code

(Optional) Specifies the ICMP message code. The valid number for the message 
code is from 0 to 255

icmp-message

(Optional) Specifies the ICMP message type name or the ICMP message type and 
code by name. Names that can be used are 'administratively-prohibited', 'alternate-
address', 'conversion-error', 'host-prohibited', 'net-prohibited', 'echo', 'echo-reply', 
'pointer-indicates-error', 'host-isolated', 'host-precedence-violation', 'host-redirect', 
'host-tos-redirect', 'host-tos-unreachable', 'host-unknown', 'host-unreachable', 
'information-reply', 'information-request', 'mask-reply', 'mask-request', 'mobile-
redirect', 'net-redirect', 'net-tos-redirect', 'net-tos-unreachable', 'net-unreachable', 
'net-unknown', 'bad-length', 'option-missing', 'packet-fragment', 'parameter-problem', 
'port-unreachable', 'precedence-cutoff', 'protocol-unreachable', 'reassembly-timeout', 
'redirect-message', 'router-advertisement', 'router-solicitation', 'source-quench', 
'source-route-failed', 'time-exceeded', 'timestamp-reply', 'timestamp-request', 
'traceroute', 'ttl-expired', 'unreachable'.

Default

None.

Command Mode

Extended Expert Access-list Configuration Mode.

Command Default Level

Level: 12

Usage Guideline

A sequence number will be assigned automatically if the user did not assign it 
manually. The automatic assignment sequence number starts from 10 and increases 
by 10 for every new entry.

Содержание DXS-3600-16S
























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DXS-3600-16S

D-Link DAP-1650 Quick Install Manual preview
DAP-1650
Бренд: D-Link Страницы: 16
D-Link DCH-G020 How-To preview
DCH-G020
Бренд: D-Link Страницы: 2
D-Link DES-1005E Quick Install Manual preview
DES-1005E
Бренд: D-Link Страницы: 2
E-Trailer E-Switch Product Manual preview
E-Switch
Бренд: E-Trailer Страницы: 8
IDEC HS5L Series Instruction Sheet preview
HS5L Series
Бренд: IDEC Страницы: 8
IDEM SAFETY SWITCHES MPR Operating Instructions preview
MPR
Бренд: IDEM SAFETY SWITCHES Страницы: 2
vantiva COM3000 Installation Manual preview
COM3000
Бренд: vantiva Страницы: 58
Abtus MAX-USB44P Manual preview
MAX-USB44P
Бренд: Abtus Страницы: 15
Grozone Control OSWDN User Manual preview
OSWDN
Бренд: Grozone Control Страницы: 20
4O3A Signature ANTENNA GENIUS 8x2 v2 PLUS User Manual preview
Signature ANTENNA GENIUS 8x2 v2 PLUS
Бренд: 4O3A Страницы: 57
DANLERS BMEXPIR Installation Notes preview
BMEXPIR
Бренд: DANLERS Страницы: 2
LEGRAND 672 34 Quick Start Manual preview
672 34
Бренд: LEGRAND Страницы: 4
Inter-m PX-6116 Operation Manual preview
PX-6116
Бренд: Inter-m Страницы: 12
J-TECH JTECH-4K88-EX-RX Operating Instructions Manual preview
JTECH-4K88-EX-RX
Бренд: J-TECH Страницы: 40
Digitus DS-55511 Manual preview
DS-55511
Бренд: Digitus Страницы: 10
Accton Technology CheetaHub Classic-2041 Quick Installation Manual preview
CheetaHub Classic-2041
Бренд: Accton Technology Страницы: 7
Dwyer Instruments CFS2 Series Installation And Operating Instructions preview
CFS2 Series
Бренд: Dwyer Instruments Страницы: 4
Xantech 686-10 Installation Instructions preview
686-10
Бренд: Xantech Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды