DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
258
23-3 ip igmp last-member-query-interval
This command is used to configure the interval at which the switch sends IGMP group-specific or group-source-specific
(with IGMP Version 3) query messages, use the
ip igmp last-member-query-interval
command in interface
configuration mode. To set this interval to the default value, use the
no
form of this command.
ip igmp last-member-query-interval
seconds
no ip igmp last-member-query-interval
Parameters
23-4 ip igmp query-interval
This command is used to configure the query interval of an ordinary member. Use the
no
form to set the query interval
of ordinary member to the default value.
ip igmp query-interval
seconds
Default
The switch is not added to the multicast group manually.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 8. (
EI Mode Only Command
)
Usage Guideline
This command directly adds an interface to a multicast group. You can use this
command to add an interface to a group.
Use command
show ip igmp groups static
command, to verify your setting.
Example
This example shows how to add a host group member manually.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface vlan 1
DXS-3600-32S(config-if)#ip igmp static-group 233.3.3.3
DXS-3600-32S(config-if)#
seconds
Specifies the interval sending the group query message in the range1 to 25, in
seconds.
Default
1 second.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 8. (
EI Mode Only Command
)
Usage Guideline
When a device receives an IGMP Version 2 (IGMPv2) or IGMP Version 3 (IGMPv3)
message indicating that a host wants to leave a group, source, or channel, it sends
last-member-query-count(equal to robustness-variable) group, group-specific, or
source-specific IGMP query messages at intervals set by the ip igmp last-member-
query-interval command. If no response is received after this period, the device
stops forwarding for the group, source, or channel.
Use command
show ip igmp interface
command to verify your setting.
Example
This example shows how to set the interval of sending the IGMP group-specific or
group-source-specific query message to 20 seconds on interface VLAN 1.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface vlan 1
DXS-3600-32S(config-if)#ip igmp last-member-query-interval 20
DXS-3600-32S(config-if)#
Содержание DXS-3600-16S
