DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
234
19-3 show ets interface
This command is used to display the ETS information of a given interface or all interfaces.
show ets interface [
INTERFACE-ID
[, | -]] [recommend]
Parameters
cos-map
COS-QUEUE
COS-VALUE
[, | -]
Specifies the recommended Priority Assignment Table.
COS-QUEUE
: Specifies the queue ID (Traffic Class) for the specified priority. The
value is from 0 to N. The N is the number of traffic classes supported per port.
COS-VALUE
: Specifies the priority to be mapped. The value is from 0 to 7.You can
specify multiple priorities queued into the specified traffic class.
Default
The recommended bandwidth is 4, 7, 11, 14, 18, 21, 25 (in percentage) for Traffic
Classes 0 to 6 respectively. 0 for Traffic Class 7 means the recommended
transmission selection algorithm is “strict priority”. The default priority (CoS) to Traffic
Class mapping is:
• 0 -> 1
• 1 -> 0
• 2 -> 2
• 3 -> 3
• 4 -> 4
• 5 -> 5
• 6 -> 6
• 7 -> 7
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is available for physical port configuration. Use this command to
specify the recommended bandwidth (in percent) for each Traffic Class. The value of
zero means using “strict priority” for the corresponding Traffic Class. You need to
enable the Switch to transmit LLDP DCBX ETS-Recommendation TLVs to advertise
the ETS recommendation.
If the command
no ets recommand
is issued without any keywords, all ETS
recommendation settings (bandwidth and priority assignments) will be reverted to
their default values.
Example
This example shows how to configure the recommended transmission selection
algorithm for Traffic Class 0 to 4 as ETS (Enhanced Transmission Selection) and the
allocated bandwidth is 10%, 10%, 20%, 20%, 40% respectively. For Traffic Classes
5 to 7 the recommended transmission selection algorithm is strict priority.
DXS-3600-32S#configure terminal
DXS-3600-16S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)# ets recommend bandwidth 10 10 20 20 40 0 0 0
DXS-3600-32S(config-if)#
Example
This example shows how to configure the recommended Priority Assignment Table,
to assign priority 1-2 to Traffic Class 2 at interface
1/0/1
.
DXS-3600-32S#configure terminal
DXS-3600-16S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)# ets recommend cos-map 2 1-2
DXS-3600-32S(config-if)#
INTERFACE-ID
(Optional) Specifies that valid interfaces are physical interface.
,
(Optional) Specifies a series of interfaces, or separate a range of interfaces from a
previous range. No space before and after the comma.
Содержание DXS-3600-16S
