D-Link DXS-3600-16S, Руководство пользователя

Страница: 3 / 695

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
iii
Notes, Notices, and Cautions
Below are examples of the 3 types of indicators used in this manual. When administering your switch using the
information in this document, you should pay special attention to these indicators. Each example below provides an
explanatory remark regarding each type of indicator.
Command Descriptions
The information pertaining to each command in this reference guide is presented using a number of template fields.
The fields are:
•
Description - This is a short and concise statement describing the commands functionality.
• Syntax - The precise form to use when entering and issuing the command. The form conventions are described in
the table shown under the section “Conventions” on page iv of this guide.
• Syntax Description - A table where each row describes the optional or required arguments, and their use, that
can be issued with the command.
• Default - If the command sets a configuration value or administrative state of the switch then any default settings
(i.e. without issuing the command) of the configuration is shown here.
• Command Mode - The mode in which the command can be issued. The modes are either User EXEC, Privileged
EXEC, Global Configuration or a specific configuration mode. These modes are described in the section titled
“Command Modes” on page v below.
• Command Usage - If necessary, a detailed description of the command and its various utilization scenarios is
given here.
• Example(s) - Each command is accompanied by a practical example of the command being issued in a suitable
scenario.
Command Modes
There are several command modes available in the command-line interface (CLI). The set of commands available to
the user depends on both the mode the user is currently in and their privilege level. For each case, the user can see all
the commands that are available in a particular command mode by entering a question mark (?) at the system prompt.
The command-line interface has five privilege levels:
•
Basic User - Privilege Level 1. This user account level has the lowest priority of the user accounts. The purpose of
this type of user account level is for basic system checking.
• Advanced User - Privilege Level 3. This user account level is allowed to configure the terminal control setting.
This user account can only show limited information that is not related to security.
• Power User - Privilege 8. This user account level can execute fewer commands than operator, including configura-
tion commands other than the operator level and administrator level commands.
{a | b | c} Braces enclose alternative keywords seperated by vertical bars. Generally, one of
the keywords in the seperated list can be chosen.
[a | d | c] Optional values or arguements are enclosed in square barackets and seperated by
vertical bars. Generally, one or more of the vales or arguements in the seperated list
can be chosen.
Blue Courier Font
This convention is used to represent an example of a screen console display
including example entries of CLI command input with the corresponding output. All
examples used in this manual is based on the
DXS-3600-32S switch in the DXS-
3600 Series.
NOTE: A note indicates important information that helps you make better use of your device
NOTICE: A notice indicates either potential damage to hardware or loss of data and tells you how to
avoid the problem
CAUTION: A caution indicates a potential for property damage, personal injury, or death.
Convention Description