manualshive.com logo in svg

D-Link DXS-3600-16S, Руководство пользователя

D-Link DXS-3600-16S - мощный коммутатор с возможностью управления, предназначенный для организации надежных сетей. На нашем сайте вы можете бесплатно загрузить руководство по быстрой установке и другие руководства для этого устройства. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide

151

Usage Guideline

This command displays the parameters of BGP.

Example

This example shows the output from the 

show ip bgp parameters

 command, in 

privileged mode.

DXS-3600-32S#show ip bgp parameters

BGP Global State                   : Enabled

Version                            : 4

BGP Router Identifier              : 9.9.9.9

Synchronization                    : Disabled

Enforce First AS                   : Disabled

Local AS Number                    : 65000

Hold Time                          : 180 Seconds

Keepalive Interval                 : 60 Seconds

Always Compare MED                 : Disabled

Deterministics MED                 : Disabled

Med Confed                         : Disabled

Default Local Preference           : 100

AS Path Ignore                     : Disabled

Compare Router ID                  : Disabled

MED Missing as Worst               : Disabled

Compare Confederation Path         : Disabled

Fast External Fallover             : Enabled

Aggregate Next Hop Check           : Disabled

Default IPv4 Unicast               : Enabled

DXS-3600-32S#

Display Parameters

Description

BGP Global State

BGP global state, In this version, BGP always is enabled.

Version

BGP protocol version.

BGP Router Identifier

BGP process’s router ID.

Synchronization

BGP synchronization state.

Enforce First AS

When the setting is enabled, any updates received from an external neighbor, that 
does not have the neighbor’s configured Autonomous System (AS) at the beginning 
of the AS_PATH in the received update, will be denied.

Local AS Number

The local AS number.

Hold Time

The system will declare a peer as dead if a keepalive message is received that is 
more than the hold time.

Keepalive Interval

Frequency that a BGP send keepalive message to peer.

Always Compare MED

Enable or disable the comparison of the Multi Exit Discriminator (MED) for paths 
from the neighbors in different Autonomous Systems.

Deterministics MED

Enable or disable to enforce the deterministic comparison of the Multi Exit 
Discriminator (MED) for paths received from the neighbors within the same 
Autonomous System.

Med Confed

If enabled, the BGP process will compare the MED for the routes that are received 
from confederation peers.

Default Local Preference

Specifies the default local preference value. The default value is 100.

AS Path Ignore

If enabled, the BGP process will ignore the AS path in the path selection process. By 
default this value is disabled.

Compare Router ID

If enabled, the BGP process will include the router ID in the path selection process. 
Similar routes are compared and the route with the lowest router ID is selected. By 
default this value is disabled.

MED Missing as Worst

If enabled, the BGP process will assign a value of infinity to routes that are missing 
the Multi Exit Discriminator (MED) attribute.

Compare Confederation Path

If enabled, the BGP process will compare the confederation AS path length of the 
routes received. The shorter the confederation AS path length, the better the route 
is.

Содержание DXS-3600-16S
























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DXS-3600-16S

B&B Electronics 485DSS Manual preview
485DSS
Бренд: B&B Electronics Страницы: 26
B&B Electronics 232XS5 Instruction Manual preview
232XS5
Бренд: B&B Electronics Страницы: 15
B&B Electronics 232BSS4 Instruction Manual preview
232BSS4
Бренд: B&B Electronics Страницы: 45
Lantronix SM12XPA Install Manual preview
SM12XPA
Бренд: Lantronix Страницы: 40
Lantronix SM12XPA Quick Start Manual preview
SM12XPA
Бренд: Lantronix Страницы: 2
Lantronix SISTP1040-551-LRT Quick Start Manual preview
SISTP1040-551-LRT
Бренд: Lantronix Страницы: 2
Lantronix SM24TBT2DPA Quick Start Manual preview
SM24TBT2DPA
Бренд: Lantronix Страницы: 2
Lantronix SISPM1040-3 L Series Quick Start Manual preview
SISPM1040-3 L Series
Бренд: Lantronix Страницы: 2
Lantronix SISPM1040 L3 Series Install Manual preview
SISPM1040 L3 Series
Бренд: Lantronix Страницы: 36
Lantronix SecureLinx Spider Quick Start Manual preview
SecureLinx Spider
Бренд: Lantronix Страницы: 18
Lantronix LSS2200-8P User Manual preview
LSS2200-8P
Бренд: Lantronix Страницы: 8
Lantronix EDS4100 Quick Start Manual preview
EDS4100
Бренд: Lantronix Страницы: 6
Lantronix SISPM1040-582-LRT Manual preview
SISPM1040-582-LRT
Бренд: Lantronix Страницы: 272
Lantronix Xpress-Pro SW 52000 Supplementary Manual preview
Xpress-Pro SW 52000
Бренд: Lantronix Страницы: 8
wavin neoHub Quick Start Manual preview
neoHub
Бренд: wavin Страницы: 4
PRO SIGNAL PSG3450 Manual preview
PSG3450
Бренд: PRO SIGNAL Страницы: 5
ORiNG IPS-3082GC-24V Quick Installation Manual preview
IPS-3082GC-24V
Бренд: ORiNG Страницы: 2
Gefen EXT-DP-EDIDP User Manual preview
EXT-DP-EDIDP
Бренд: Gefen Страницы: 56

Бренды по названию

Популярные бренды

Загрузить еще бренды