DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
660
73-3 random-detect exponential-weight
This command is used to configure the WRED exponential weight factor for the average queue size calculation for the
queue. The no form is used to configure it to the default setting.
random-detect exponential-weight
COS-VALUE
exponent <
VALUE 0-15
>
no random-detect exponential-weight
Parameters
73-4 random-detect profile
This command is used to configure the WRED profile. Use no form of this command to configure it to default setting.
random-detect profile
id
[tcp | non-tcp] [green | yellow | red] min-threshold <
0-100
> max-threshold <
0-100
>
max-drop-rate <
0-14
>
no random-detect profile
id
Parameters
COS-VALUE
Specifies the CoS queues on which exponent will be set.
exponent <
VALUE 0-15
>
Specifies the exponent value used in the average queue size calculation. This value
must be between 0 and 15.
Default
The default exponential weight factor is 9.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
Only physical ports are valid for this command.
Example
This example shows how to configure the exponent to 10 and the queue to 5.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/3
DXS-3600-32S(config-if)#random-detect exponential-weight 5 exponent 10
Success
DXS-3600-32S(config-if)#
id
Specifies the ID of the WRED profile that will be set.
tcp
Specifies the WRED drop parameters for TCP packet to be set. If not specified, the
same WRED drop parameter will be set for both type of traffic.
non-tcp
Specifies the WRED drop parameters for a Non-TCP packet to be set. If not
specified, the same WRED drop parameter will be set for both type of traffic.
green
Specifies the WRED drop parameters for the green packet to be set. If not specified,
the same WRED drop parameter will be set for all color packet.
yellow
Specifies the WRED drop parameters for the yellow packet to be set. If not specified,
the same WRED drop parameter will be set for all color packet.
red
Specifies the WRED drop parameters for the red packet to be set. If not specified,
the same WRED drop parameter will be set for all color packet.
min-threshold <
0-100
>
Specifies the minimum queue size (in percentage of total queue size) to start WRED
dropping. This value must be between 0 and 100.
max-threshold <
0-100
>
Specifies the maximum queue size (in percentage of total queue size) over which
WRED will drop all packets destined for this queue. This value must be between 0
and 100.
Содержание DXS-3600-16S
