DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
v
User EXEC Mode at Basic User Level
This command mode is mainly designed for checking basic system settings. This command mode can be entered by
logging in as a basic user.
Privileged EXEC Mode at Advanced User Level
This command mode is mainly designed for checking basic system settings, allowing users to change the local
terminal session settings and carrying out basic network connectivity verification. One limitation of this command mode
is that it cannot be used to display information related to security. This command mode can be entered by logging in as
an advanced user.
Privileged EXEC Mode at Power User Level
User logged into the switch in privileged EXEC mode at this level can execute fewer commands than operator,
including the configuration commands other than the operator level and administrator level commands. The method to
enter privileged EXEC mode at power user level is to login to the switch with a user account that has a privileged level
of 8.
Privileged EXEC Mode at Operator Level
Users logged into the Switch in privileged EXEC mode at this level can change both local and global terminal settings,
monitor, and perform system administration tasks like clearing configuration settings (except for security related
information such as user accounts, SNMP account settings etc.) The method to enter privileged EXEC mode at
operator level is to login to the Switch with a user account that has a privilege level of 12.
Privileged EXEC Mode at Administrator Level
This command mode has a privilege level of 15. Users logged in with this command mode can monitor all system
information and change any system configuration settings mentioned in this Configuration Guide. The method to enter
privileged EXEC mode at administrator level is to login to the Switch with a user account that has a privilege level of 15.
Global Configuration Mode
The primary purpose of global configuration mode is to apply global settings on the entire Switch. Global configuration
mode can be accessed at advanced user, power user, operator or administrator level user accounts. However, security
related settings are not accessible at advanced user, power user or operator user accounts. In addition to applying
global settings on the entire Switch, the user can also access other sub-configuration modes. In order to access the
global configuration mode, the user must be logged in with the corresponding account level and use the configure
terminal command in privileged EXEC mode.
In the following example, the user is logged in as an Administrator in privileged EXEC mode and uses the configure
terminal command to access global configuration mode:
The
exit
command is used to exit global configuration mode and return to privileged EXEC mode.
The procedures to enter the different sub-configuration modes can be found in the related chapters in this
Configuration Guide. The command modes are used to configure the individual functions.
IP Access-List Configuration
Mode
For specifying filtering criteria for an IP access list.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#
DXS-3600-32S(config)#exit
DXS-3600-32S#
Command Mode /
Privilege Level
Purpose
Содержание DXS-3600-16S
