D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 95 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
91
<name 1-32> - Enter the profile name here. This name can be up to 32 characters long.
add - Specifies that a profile or a rule will be added.
access_id - Specifies the index of the access list entry. The value range is 1-256, but the
supported maximum number of entries depends on the project. If the auto_assign option is
selected, the access ID is automatically assigned, when adding multiple ports.
auto_assign - Specifies that the access ID will automatically be assigned.
<value 1-256> - Enter the access ID used here. This value must be between 1 and 256.
ethernet - Specifies to configure the ethernet access profile.
vlan - (Optional) Specifies the VLAN name.
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters
long.
vlan_id - (Optional) Specifies the VLAN ID used.
<vlanid 1-4094> - Enter the VLAN ID used here. This value must be between 1 and 4094.
mask - (Optional) Specifies an additional mask parameter that can be configured.
<hex 0x0-0x0fff> - Enter the mask value here.
source_mac - (Optional) Specifies the source MAC address.
<macaddr> - Enter the source MAC address used for this configuration here.
mask - (Optional) Specifies an additional mask parameter that can be configured.
<macmask> - Enter the source MAC mask used here.
destination_mac - (Optional) Specifies the destination MAC address.
<macaddr> - Enter the destination MAC address used for this configuration here.
mask - (Optional) Specifies an additional mask parameter that can be configured.
<macmask> - Enter the destination MAC mask here.
802.1p - (Optional) Specifies the value of the 802.1p priority tag. The priority tag ranges from 1 to
7.
<value 0-7> - Enter the 802.1p priority tag value here.
ethernet_type - (Optional) Specifies the Ethernet type.
<hex 0x0-0xffff> - Enter the Ethernet type mask here.
ip - (Optional) Specifies to configure the IP access profile.
vlan - (Optional) Specifies a VLAN name.
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters
long.
vlan_id - (Optional) Specifies that VLAN ID used.
<vlanid 1-4094> - Enter the VLAN ID used here. This value must be between 1 and 4094.
mask - Specifies an additional mask parameter that can be configured.
<hex 0x0-0x0fff> - Enter the mask value here.
source_ip - (Optional) Specifies an IP source address.
<ipaddr> - Enter the source IP address used for this configuration here.
mask - Specifies an additional mask parameter that can be configured.
<netmask> - Enter the source netmask used here.
destination_ip - (Optional) Specifies an IP destination address.
<ipaddr> - Enter the destination IP address used for this configuration here.
mask - Specifies an additional mask parameter that can be configured.
<netmask> - Enter the destination netmask used here.
dscp - (Optional) Specifies the value of DSCP. The DSCP value ranges from 0 to 63.
<value> - Enter the DSCP value here.
icmp - (Optional) Specifies to configure the ICMP parameters.
type - Specifies that the rule will apply to the ICMP Type traffic value.
<value 0-255> - Enter the ICMP type traffic value here. This value must be between 0 and
255.
code - Specifies that the rule will apply to the ICMP Code traffic value.
<value 0-255> - Enter the ICMP code traffic value here. This value must be between 0 and
255.
igmp - (Optional) Specifies to configure the IGMP parameters.
type - Specifies that the rule will apply to the IGMP Type traffic value.
<value 0-255> - Enter the IGMP type traffic value here. This value must be between 0 and
255.
tcp - Specifies to configure the TCP parameters.
src_port - (Optional) Specifies that the rule will apply to a range of TCP source ports.