D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 168 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
164
Additional HTTP Port - Displays the port number of the additional HTTP port configured for
traffic. A value of 0 indicates that only port 80 is configured for HTTP traffic.
Additional HTTP Secure Port - Displays the port number of the additional HTTPS secure port. A
value of 0 indicates no additional port and the default port (443) is used.
Peer Switch Statistics Reporting Interval - Displays the interval at which the peer switches
send its authenticated client statistics to the Cluster Controller. The reporting interval is in the
range of 0, 15-3600 seconds where 0 disables statistical reporting.
Authentication Timeout - Displays the number of seconds to keep the authentication session
open with the client. When the timeout expires, the switch disconnects any active TCP or SSL
connection with the client which means that if a CP user does not enter valid credentials within
the time period, the authentication page will be served again in order for the client to gain
access to the network.
Supported Captive Portals - Displays the number of supported Captive Portals in the system.
Configured Captive Portals - Displays the number of Captive Portals configured on the switch.
Active Captive Portals - Displays the number of Captive Portal instances that are operationally
enabled.
Local Supported Users - Displays the number of users that can be added and configured using
the local user database.
Configured Local Users - Displays the number of users that are configured from the local user
database.
System Supported Users - Displays the total number of authenticated users that the system can
support.
Authenticated Users - Displays the number of users currently authenticated to all Captive Portal
instances on this switch.
Client Authentication Failure Traps - Displays whether the SNMP agent sends a trap when a
client attempts to authenticate with a Captive Portal but is unsuccessful.
Client Connection Traps - Displays whether the SNMP agent sends a trap when a client
authenticates with and connects to a Captive Portal.
Client Database Full Traps - Displays whether the SNMP agent sends a trap each time an entry
cannot be added to the client database because it is full.
Client Disconnection Traps - Displays whether the SNMP agent sends a trap when a client
disconnects from a Captive Portal.
15-6 create captive_portal configuration
Description
This command is used to create a Captive Portal configuration instance on the Switch.
Format
create captive_portal configuration <int 1-10>
Parameters
<int 1-10> - Enter the Captive Portal's configuration ID used here. This value must be between 1
and 10. The default value is 1.
Restrictions
Only Administrators can issue this command.
Example
To create a Captive Portal configuration ID: