D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 8 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
4
DWS-3160-24PC:admin#config ipif System ipaddress 10.90.90.91/8
Command: config ipif System ipaddress 10.90.90.91/8
Success.
DWS-3160-24PC:admin#
•
At the CLI command prompt, enter the ‘ config ipif System ipaddress 10.90.90.91/8 ’
command and press ‘ Enter’ . This will change the IP address of the Switch to 10.90.90.91.
•
Also notice the subnet mask’s notation method. Here we use the value ‘/8’ which means
that the subnet mask will be change to 255.0.0.0 using the CIDR notation.
•
Alternatively, if you don’t know the CIDR notation for your subnet mask, you can also
simply type out the subnet mask. For example: ‘
config ipif System ipaddress
10.90.90.91/255.0.0.0 ’.
The Switch can now be configured and accessed using TELNET or the Web-based management.
The Switch’s IP address can also automatically be obtained by using the BOOTP or DHCP
protocol.
There are a number of helpful features included in the CLI. Entering the ‘ ?’ command will display a
list of all of the top-level commands.
DWS-3160-24PC:admin#?
Command: ?
..
?
cable_diag ports
cd
cfm linktrace
cfm lock md
cfm loopback
change drive
clear
clear address_binding dhcp_snoop binding_entry ports
clear arptable
clear attack_log
clear cfm pkt_cnt
clear counters
clear ethernet_oam ports
clear fdb
clear igmp_snooping data_driven_group
clear igmp_snooping statistics counter
clear log
clear mac_based_access_control auth_state
clear mld_snooping data_driven_group
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
When entering a command without its required parameters, the CLI will prompt you with a Next
possible completions: message.