D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 643 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
639
Chapter 68 Syslog and Trap Source-
interface Command List
config syslog source_ipif [<ipif_name 12> {<ipaddr> | <ipv6addr>} | none]
show syslog source_ipif
config trap source_ipif
[<ipif_name 12> {<ipaddr> | <ipv6addr> } | none]
show trap source_ipif
68-1 config syslog source_ipif
Description
This command is used to configure the syslog source IP interface.
Format
config syslog source_ipif [<ipif_name 12> {<ipaddr> | <ipv6addr>} | none]
Parameters
ipif - Specifies the IP interface name. If only Specifies this parameter, the least IPv4 address and
the smallest IPv6 address of ipif_name will be used as source IP addresses.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
<ipaddr> - (Optional) Enter the IP address used for the configuration here.
<ipv6addr> - (Optional) Enter the IPv6 address used for the configuration here.
none - Specifies to clear the configured source IP interface.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the syslog source IP interface:
DWS-3160-24PC:admin#config syslog source_ipif System 10.90.90.90
Command: config syslog source_ipif System 10.90.90.90
Success.
DWS-3160-24PC:admin#
To clear the configured source IP interface for syslog: