D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 257 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
253
Chapter 22 Debug Software Command
List
debug error_log [dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
debug buffer [utilization | dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
debug output [module <module_list> | all] [buffer | console]
debug config error_reboot [enable | disable]
debug config state [enable | disable]
debug show arpunresolved_list
debug show error_reboot state
debug show status
{module <module_list>}
debug address_binding [event | dhcp | all] state [enable | disable]
no debug address_binding
debug stp config ports
[<portlist> | all] [event | bpdu | state_machine | all] state [disable | brief |
detail]
debug stp show information
debug stp show flag
{ports <portlist>}
debug stp show counter {ports [<portlist> | all]}
debug stp clear counter [ports <portlist> | all]
debug stp state [enable | disable]
22-1 debug error_log
Description
This command is use to dump, clear or upload the software error log to a TFTP server.
Format
debug error_log [dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
Parameters
dump - Display the debug message of the debug log.
clear - Clear the debug log.
upload_toTFTP - Upload the debug log to a TFTP server specified by IP address.
<ipaddr> - Specifies the IPv4 address of the TFTP server.
<path_filename 64> - The pathname specifies the DOS pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This value can be up to 64 characters
long.
Restrictions
Only Administrators can issue this command.
Example
To dump the error log: