D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 200 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
196
Chapter 17 Compound Authentication
Command List
create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
delete authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
config authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] [add | delete]
ports [<portlist> | all]
config authentication ports [<portlist> | all] {auth_mode [port_based | host_based {vlanid
<vid_list> state [enable | disable]}] | multi_authen_methods [none | any | dot1x_impb |
impb_cp | mac_impb] | cp_configuration <int 1-10>}
show authentication guest_vlan
show authentication ports
{<portlist>}
enable authorization attributes
disable authorization attributes
show authorization
config authentication server failover
[local | permit | block]
show authentication
17-1 create authentication guest_vlan
Description
This command is used to assign a static VLAN to be a guest VLAN. The specific VLAN which
assigned to guest VLAN must be existed. The specific VLAN which assigned to guest VLAN can’t
be deleted.
Format
create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Parameters
vlan - Specifies the guest VLAN by VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Specifies the guest VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This ID must be between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To assign a static VLAN to be guest VLAN: