D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 381 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
377
Parameters
ports - Specifies the list of ports you would like to set the maximum number of entries that can be
learned.
<portlist> - Enter the list of ports used here.
all - Specifies that all the ports will be used.
limit - Specifies the maximum number.
<value 1-50> - Enter the limit value here. This value must be between 1 and 50.
no_limit - Specifies that the maximum number of learned entries is unlimited.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the maximum number of DHCP IPv4 snooping entries that ports 1–3 can learn to 10:
DWS-3160-24PC:admin#config address_binding dhcp_snoop max_entry ports 1-3 limit
10
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10
Success.
DWS-3160-24PC:admin#
34-15 enable address_binding trap_log
Description
This command is used to send traps and logs when the IMPB module detects an illegal IP and
MAC address.
Format
enable address_binding trap_log
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the IMPB traps and logs: