D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 762 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
758
Format
delete wireless ap_database [<macaddr> | all]
Parameters
<macaddr> - Enter the MAC address of a physical AP here.
all - Specifies that all AP entries, present in local AP database, will be deleted.
Restrictions
Only Administrators can issue this command.
Example
To delete all AP entries:
DWS-3160-24PC:admin#delete wireless ap_database all
Command: delete wireless ap_database all
Success.
DWS-3160-24PC:admin#
87-3 config wireless ap_database
Description
This command is used to configure the AP settings identified by the AP MAC address. In this
command, the user can configure parameters for each individual valid AP.
NOTE: If a valid AP is already being managed by the Switch, the user needs to
reboot the AP to pick up any configuration changes in the valid AP database.
Format
config wireless ap_database <macaddr> [location [<desc 1-32> | clear] | mode
[ws_managed [profile [<int 1-16> | default] | password {encrypted <password 128>} | radio
<int 1-2> {channel <int 0-165> | power <int 0-100>}] | standalone [channel [<int 0-165> |
default] | security [any | open | wep | wpa | default] | ssid [<desc 1-32> | clear] | wire_mode
[allowed | not_allowed | default]] | rogue]]
Parameters
<macaddr> - Enter the MAC address of a physical AP here.
location - Specifies a descriptive string for the AP location.
<desc 1-32> - Enter the AP location name used here. This name can be up to 32 characters
long.
clear - Specifies that the descriptive string for the AP location will be cleared.
mode - Specifies the managed mode for an AP.
ws_managed - Specifies that AP will be managed by the Wireless Switch upon discovery.
This is the default managed mode.
profile - Specifies the AP profile ID for AP configuration.
<int 1-16> - Enter the AP profile ID value used here. This value must be between 1 and