D-Link DWS-3160-24TC, Справочное руководство CLI

Страница: 890 / 983

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
886
Restrictions
Only Administrators can issue this command.
Example
To configure the Layer 2 Distributed Tunneling parameters:
DWS-3160-24PC:admin#config wireless dist_tunnel max_clients 800 idle_timeout
100 max_timeout 300 mcast_repl 400
Command: config wireless dist_tunnel max_clients 800 idle_timeout 100
max_timeout 300 mcast_repl 400
Success.
DWS-3160-24PC:admin#
95-23 config wireless ip_control_port
Description
This command is used to configure the IP control data communication port. It configures the first IP
port number within the range that the wireless system uses to send and receive IP traffic. By
default the wireless system uses the IP port number 57775. When we change the base IP port
number, the wireless feature will automatically be disabled and re-enabled. The default wireless IP
port number is not sent as part of the global Switch configuration in the cluster configuration
distribution command. Every Switch in the cluster must be configured independently with the new
IP port number. When the wireless IP port number is changed from its default value on the Switch,
then it must also be changed on the Access Points. The port number can be configured on the AP
via an AP administrative command, or DHCP option 43, sub-option 3. If the port is configured via
DHCP, then the DHCP setting supersedes the configured setting.
Format
config wireless ip_control_port [<int 1-65000> | default]
Parameters
<int 1-65000> - Enter the identifier value for the IP control port here. This value must be between
1 and 65000. The default value is 57775.
default - Specifies that the default value will be used.
Restrictions
Only Administrators can issue this command.
Example
To configure the IP control data communication port: