Cytech Comfort II, Руководство пользователя

Страница: 36 / 100

select the corresponding keypad for monitoring. End monitoring by
pressing * or #.
During Voice Station mode, real time Alarm Tracking is also
active, i.e.. violated zones will be announced as they occur.
Dial-out to Voice Phone
1 When Comfort dials to a Voice phone (telephone or cellular phone), it
will announce the Alarm event which caused the dial-out e.g. “Intruder
Alarm” , “Fire Alarm”, “Panic Alarm”, and the zone name (e.g. “back
door”, “kitchen window”). Comfort waits for a voice answer (e.g.
“hello”) before announcing so you must say something.
2 Comfort will play the recorded Alarm Message, if any (e.g. “This is 16
Intelligent Home Drive”), if any. You may record the Alarm message in
the User Program Menu , 3 - Security Options, 5 - Alarm Voice Message,
1 - Record Alarm Voice Message. The Alarm Message is used to identify
the location of the premises in which the system is installed.
3 Comfort will announce ..
“Press 1 to Repeat This Message
Press # to End”
If you did not hear the message (Alarm Type, Zone name, Alarm
Message), press 1 to repeat the message. Otherwise, to acknowledge
the message and end the call, press #. Pressing # will prevent Comfort
from calling the phone number again.
4 If you need to access Comfort to listen through the keypad (5 for Voice
Station), listen to Alarm History, or disarm the system (0 for Security
Off), you can press * and your user code and # key. This bring up the
User Menu for you to operate the system.
5 When you sign in, if the alarm is in alert or full alarm state, the Alarm
History, as described above, will be played. Check how the alarm was
activated.
6 From the User Menu, go to Voice Station to listen on the Keypad to any
sound on the premises. Any zones activated will be announced as they
occur.
7 You can check event log in User Menu 3,3.
8 You may turn off the siren in User Menu 3,6 if you are certain that it was
a false alarm. The security system remains armed and will reactivate if
any zone is violated.
9 When you sign in to access the user menu or press # to end the call, ,
the dialout is acknowledged, and Comfort does not call to the same
number again. If you press # to end the call without signing in, Comfort
will call to other phones in the dialing group . Never hang-up without
pressing # or entering your code, as Comfort will call on the
same number again.
A valid sign in during dial-out is recorded in the Event Log as
“”Phone Call Sign in OK”.
Comfort II User Manual
27