Cytech Comfort II, Руководство пользователя

Страница: 61 / 100

via the Entry Door. When arming to Night or Day Mode, no exit is
required.
Remote Disarm
From the telephone User main menu, press 0 for Security Off if the
system is armed or is in alarm. The option for “0 for Security Off” is not
heard if the system is not armed.
Do NOT do a Remote Disarm unless you are very sure that it is
safe to do so.
Remote Disarm may not be allowed by your Monitoring company
and may be disabled by the installer.
Bypass Zones
Keypad F+1 or, by User Menu 3,5
Silence a Trouble Alarm
When the keypad beeps continuously and the green Home/Trouble
indicator flashes, enter your user code and # on any keypad. The
keypad will announce the cause of the trouble alarm, e.g.
“Phone Trouble”, “Battery Warning”, “Power Failure”, “Zone Trouble,
(zone number)”, “Communications Failure, (module id)”.
Take note of the trouble alarm message and call your installer. The
trouble alarm message will help the installer to diagnose the problem.
As long as the trouble condition persists, the green Home/Trouble
indicator will continue flashing. Every time you sign in to the User Menu,
the Trouble alarm message will be announced. When the trouble
condition is cleared, the Home/Trouble indicator will become steady.
Listen To Event Log
Keypad F+5 or User Menu 3,3
When listening to the Voice menu you can navigate through the Event
Log by pressing 1 for next event, 2 for Previous event, 3 for Next Day, 4
for Previous Day, 0 for 1st event, 9 for last event.
Refer to User Menu Reference to see what events can be logged.
Listen to Alarm History
User Menu 3,2 plays Alarm History. After an alarm, the Alarm History is
played automatically upon signing in with your code. Alarm History keeps
the first 20 events after arming the security system, and is erased each
time security is armed.
Do Security Check (Walk Test)
Keypad F+3, 2 or User Menu 3,4,2. End by pressing any key.
Comfort II User Manual
52