Cytech Comfort II, Руководство пользователя

Страница: 35 / 100

SECTION 3 WHAT TO DO DURING AN ALARM
Read this chapter to find out what you should do in the event of an
alarm, when you are within the premises and when you are out.
Turning off the Alarm
Enter your user code and # key to turn off, or disarm the alarm system.
This silences the internal and external sirens and the keypad siren tone.
Do not press the * key before the code, as this will go into voice
menu and not turn off the security or alarm. If you do get into
the voice menu, press 0 for Security Off to disarm.
Alarm Verification
Comfort helps to verify if alarms are genuine, by providing Alarm History,
two way Voice Station monitoring using any Keypad and Event Log.
Alarm History (User Menu 3,2)
The Alarm History gives the sequence of events which caused the alarm,
e.g.
Alarm History...
Thursday , 11:23 P.M., System Armed.
Thursday, 2:23 A.M. Downstairs Movement .
Thursday, 2:24 AM. Upstairs Movement
Alarm History is automatically played when Comfort calls to a Voice
Phone during an alarm. When the security system is disarmed, the Alarm
History remains in memory, until the next time the system is armed.
Event log (F5, or User Menu 3,3)
The voice event log can be used to check the events prior to or at the
time of an alarm, like who armed or disarmed the system. See the
previous section for details.
­
For KP04, the event log is not announced on the speaker, the
events are displayed on the LCD.
Voice Station (User Menu 5)
From User Menu, press 5 to activate the Keypad to listen to any sounds
on the premises. If more than 1 Keypad is installed, you will be asked to
select one. The Keypad remains in 2-way intercom mode for 90 seconds
at a time. This allows you to listen to sounds or talk to whoever is in the
area monitored by the Keypad. When the Keypad is on, the internal
speaker is turned off temporarily to allow any noises to be heard more
clearly. If there are several Keypads, press the keypad number to
Comfort II User Manual
26