What's in the Box
Quick Installation Guide
Pro Series
Whole Home Smart Wi-Fi
Water Leak Sensor Starter Kit
DCH-S1621KT
This is your device’s Setup Code.
Please keep it as future reference
for your device.
Simple Setup
Get the
mydlink
app on the App
Store or on Google Play. Launch the
app, then
Sign In
or
Create a New
Account
.
1
Battery-powered Remote
Water Sensing Pod
(DCH-S163)
Master Plug-in Smart Wi-Fi
Water Leak Sensor
(DCH-S162)
RJ11 Sensing Cable
Cable Clips
Setup Code
2
Power on
the device and wait for
the Status LED to flash orange.
Note:
Make sure that your mobile device’s
Bluetooth is on.
3
Place your device next to your
mobile device. A prompt will appear
- tap
Add Device,
then follow the
app instructions.
mydlink
Please set up your device before mounting it.
Quick Installation Guide
Note:
If not automatically prompted
within 30 seconds, tap then tap
Add Device
.
Alerts
When water is detected from any of the
sensors connected to your whole home
water leak system,
ONLY the Master
Plug-in Smart Wi-Fi Water Leak Sensor
(DCH-S162) will sound an audible
alarm
and an alert will be sent to your
smartphone notifying you as to which unit
was triggered.
DCH-S163 pre-installed
with 2 AAA batteries
